Pages

Tuesday, November 16, 2021

Quick & Easy Drooly Bib Sewing Tutorial

 I know this is a different kind of construction, but these photos were in with the others and I thought I may as well get around to posting them! Here's an idea to make some quick bibs in an afternoon.

When the baby got to drooling excessively, I went to Joann's and bought an interesting flannel yardage with a sort of "grid" on it. Sorry I cannot give the measurements now (it's been a while) but a nice sized rectangle cut out of it covered all of the front of the baby. I'm guessing this was at least 8" across the bottom, and maybe 12" or more up the sides. Come to think of it, you could just about use a piece of printer paper as a pattern. I was going by the grid on the fabric. Whatever size you make it, cut two rectangles.

(Since I made a stack of these, I had as many rectangles as I could get out of the yardage.)



Find an appropriately sized round object to trace around, and do that centered, about 1.5 to 2" down from the top on one of the rectangles. Make sure your round object is big enough to allow some slack, because the circle will be pulled in a bit when the bib is fastened. Sorry I don't have a diameter but every baby's neck will be different! If you were to make it as a gift I would err on the generous side.

Trace it on the INSIDE/WRONG side of the fabric. 

Start sewing around the edges, right sides together with your drawing on top. Begin on the side (you will be leaving a 3" or so gap for turning in one side).

 Make sure to turn down from the top and go around that circle! You can see at the top that I left a good gap where I turned down to sew around the circle.


You can do curves on the corners if you like instead of pivoting. I did some of both. Whichever you choose, trim the corners to reduce bulk for turning. Clip down into the circle, trim the neck hole and clip into the seam allowance a bit for turning.

Turn inside out. Gently poke out all the corners with scissors or a wooden stuffing tool. Smooth and press with an iron. You could top stitch around it if you like, folding in and stitching down the opening as you go. Or just hand-stitch the opening closed. 

Now add some velcro to the top two inner "flaps" and fasten. This is why you want to be a bit generous with that circle. 

I made about a dozen of these, which was an appropriate amount for changing out several times a day.


No comments:

Post a Comment

READ ME FIRST!
Pleasant Letters are Most Welcome!

Comments will be moderated for spam control and people having a bad day or making poor life choices.

Due to time constraints it may take a few days to publish and respond to your comments.